Octane Magazine Project GS500
 18 items in this album  [slideshow] [login]  
 Gallery: Photo Gallery   
      1      


Viewed: 173 times.

Viewed: 192 times.
D&D Cycle dyno tune
Viewed: 700 times.
A decent shot of the rear. Here you can see how well the upside down tail light slips under the edge of the tail. Also note the short stalk turn signals replacing the bulky originals. If you look close you'll see the remote shock reservoir mounted on the frame rail at the point of the rear bodywork.
Viewed: 483 times.
PIC00010
Viewed: 408 times.
The CBR rearsets set the pegs back 2" and up 1". Using a CBR shift pedal and Yamaha R1 link, we set replaced the stock countershaft mounted shift pedal with a sportbike inspired link type setup.
Viewed: 593 times.
PIC00011
Viewed: 372 times.
Note the warning lights integrated into the top triple. To get rid of the big, ugly stock dash, we drilled out the triple and inserted the stock plastic light inserts.
Viewed: 512 times.
PIC00064
Viewed: 426 times.
PIC00061
Viewed: 438 times.
PIC00067
Viewed: 402 times.
We toyed with changing the light a few times. A Yamaha R1 tail light looked pretty slick, but in the end we opted to flip the stock tail light upside down. It flows better with the lines of the bike this way.
Viewed: 485 times.
again0091
Viewed: 173 times.
again0089
Viewed: 184 times.

Viewed: 172 times.

Viewed: 160 times.

Viewed: 185 times.
gs0040
Viewed: 202 times.
      1      
 Gallery: Photo Gallery   
Powered by Gallery v1.3.4